 |
K93600 Multispecimen Tester |
| Features and Benefits • Conforms to ASTM D2266, D3702, and D4172 • Multiple specimen and test configurations for friction and wear monitoring in one single unit • Electronically controlled test speed and temperature • Displacement Transducer for monitoring the amount of wear on a test specimen over time • Windows 95/98/NT TriboDATA Data Acquisition Software and Card included to record and graph spindle rotation speed, normal load, interface temperature, frictional force, and wear rate parameters in real time • Custom configurations available |
 Click on the image to view a larger photo of the instrument. |
| K93600 Multispecimen Tester The Multispecimen Tester is used to test the friction and wear characteristics of a wide variety of materials such as coatings, lubricants, plastics, metals, polymers, ceramics, and composites under various interface conditions including single, multiple, sliding, and rolling contact as well as point, line, and area contact. The test is performed by mounting a test specimen into the spindle and rotating it against a counter-face test specimen which is held stationary. The spindle rotation speed, normal load, and interface temperature can be adjusted in accordance with published ASTM standards. These operating parameters along with the resultant frictional force can be monitored using TriboDATA, the supplied Windows-based Data Acquisition Software. Specimen holders are designed for standard test configurations; optional custom designed holders for customer specific applications are also available. The test configurations are easily interchanged, allowing for a wide variety of testing applications within a single unit. The standard test configurations are shown in the configurations table. |
 Click on the image to view a larger photo of the accessories. |
|
Configurations Table |
| Test Configuration | Contact Interface | Components | Test Results |
| Ball on Flat | sliding point contact | 1, 2 or 3 balls on flat counterface specimen | dry or lubricated friction and/or wear testing |
| Cylinder on Flat | sliding line contact | 1 or 2 pins on a flat counterface specimen | dry or lubricated friction and/or wear testing |
| Four Ball Wear | sliding point contact | 1 ball rotating on 3 stationary test balls | wear preventive properties of lubricants as per ASTM D2266, D4172 |
| Thrust Washer | sliding area contact | 1 rotating test specimen against fixed steel washer with axial load | wear and/or friction properties of self-lubricated materials in rubbing contact as per ASTM D3702 |
| Slurry Erosion | surface area | 2 test pins immersed in a sand slurry | erosion resistance of the test pins in slurry using the weight loss method |
|
Ordering Information | ||||||
|
|
|