 |
KI-25330 Copper Strip Corrosion Test Tube Bath |
| Test Method The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing. Features and Benefits • Conforms to ASTM D130 and related test specifications |
 Click on the image to view a larger photo of the instrument. |
| KI-25330 Copper Strip Corrosion Test Tube Bath Constant temperature bath immerses 16 test tubes for copper strip tarnish tests of products not requiring a test bomb, including: diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Microprocessor temperature controller has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your PSSC representative for information. Welded stainless steel double-wall construction with built-in support rack. Fully insulated. Specifications Conforms to the specifications of: ASTM D130, D6074, D6158; FSPT DT-28-65; IP 154; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 Capacity: 16 test tubes Maximum Temperature: 190°C (374°F) Temperature Control Stability: ±1°C (±2°F) Heater Range: 0-750W Bath Medium: 5 gal (18.9L) water or high temperature heater transfer fluid Electrical Requirements 115V 50/60Hz, Single Phase, 7.5A 220-240V 50/60Hz, Single Phase, 4A Dimensions Ixwxh,in.(cm) 15.5x12.5x14 (39x32x36) Net Weight: 27 Ibs (12.2kg) Shipping Information Shipping Weight: 45 Ibs (20.4kg) Dimensions: 12.8 Cu. ft. |
|
Ordering Information | ||||||||||||
|
|
|